YueHouDZ is a service provider specializing in mold opening, customization, and production of silicone products!

Silicone keypad

Content navigation

Silicone keypad Epoxy Coating glue dispensing process operation

Silicone keypad Epoxy Coating glue dispensing process operation     

Let YueHouDZ Silicone Products Manufacturing tell you about the Epoxy Coating glue dispensing process of silicone keypad!

Let YueHouDZ Silicone Products Manufacturing tell you about the Epoxy Coating glue dispensing process of silicone keypad!

1. Mix the epoxy resin and curing agent according to a certain proportion and put them into the glue pot after mixing;

2. Use a glue pot to pour an appropriate amount of epoxy resin onto the surface of the silicone keypad for silk screen printing, laser engraving, or oil Spraying, and let it flow evenly to the surface of the silicone keypad;

3. If the area to be glued or the amount of glue is large, it may cause glue bubbles in the product. At this time, you must use a flame gun and spray fire to help remove the bubbles;

4. Usually, after the silicone keypad is placed for 12 hours, the epoxy resin on its surface will also solidify;

5. After waiting for the epoxy resin to solidify, the glue dispensing process is officially completed.

Silicone_keypad_Epoxy_Coating_glue_dispensing_process_operation.jpg

Put your Products into production today

You can also find us on these platforms!

youtube

facebook